文章详情
AEM OTDR的特点
日期：2025-11-04 05:16
浏览次数：413
摘要：
AEM OTDR光时域反射计
AEM适应试产需求，推出全新一代OTDR光时域反射计，极小的盲区，大动态范围，支持局域网、城域网光缆的故障定位和损耗测试，下面我们来一睹新一代AEM OTDR的风采。
以下为英文介绍资料，请酌情参考。
Tier 1 - Optical Loss Testing
Tier 1 Certification - Optical Loss Testing
In its simplest form and optical loss testing is a comparison between the optical power measured in dBm at the output of the light ...
AEM OTDR光时域反射计
AEM适应试产需求，推出全新一代OTDR光时域反射计，极小的盲区，大动态范围，支持局域网、城域网光缆的故障定位和损耗测试，下面我们来一睹新一代AEM OTDR的风采。
以下为英文介绍资料，请酌情参考。
Tier 1 - Optical Loss Testing
Tier 1 Certification - Optical Loss Testing
In its simplest form and optical loss testing is a comparison between the optical power measured in dBm at the output of the light source and the power measured at the far end of a fiber connected to that same light source. The difference is known as loss or attenuation, expressed in dB.
Combining the light source/power meter, measuring against standards and providing a pass/fail is known as an Optical Loss Test Set.
AEM OTDR光时域反射计
Tier 2 Testing
TIA-568: Optical Fiber Cabling and Components Standard
Tier 2 testing supplements Tier 1 testing with the addition of an OTDR characterization of the elements along the fiber cabling.
Simply put, Tier 2 is just testing the same fiber with an OLTS and an OTDR and documenting the results of both.
AEM OTDR光时域反射计
AEM OTDR Specifications
Available wavelengths
MM 850nm/1300nm
SM 1310nm/1550nm
Event dead zone
0.5m to 0.7 depending on wavelength
Attenuation dead zone
2.5m to 4.5m depending on wavelength
Dynamic Range
25dB @ 850nm / 27dB @1300nm
29dB @1310nm / 27dB @1550nm
Distance Measurement Range
9km for 850nm, 35km for 1300nm
80km for 1310nm, 130km for 1550nm
Pulse Width
3, 5, 10, 15,…, 24995, 25000 nsec
Individual adapters AD-OTDR-SM/AD-OTDR-MM are boxed and include 1 each of:
SC interface
2m SC-SC TRC (“connector protectors”)
LC & SC coupler
1.25mm & 2.5mm connector cleaners
AEM OTDR光时域反射计
Standalone OTDR kits/combination kits K21E/K41E/K71E include a hard case.
Launch cords are included ONLY with the Tier 1/Tier 2 combination kit K41E and the Smart Building Max kit K71E and must be purchased separately for all other configurations.
AEM OTDR光时域反射计